Automatic bagging packaging machine shrink packaging machine equipment is the most advanced and highest degree of automation of a product. The product is suitable for sealing and cutting and shrinking packaging film. Automatic shrink packaging machine can automatically send film, and then automatically bag, smooth surface, sealing cutting film packaging, shrink packaging once completed. While the waste can be recycled. Cutter Automatic Shrink machine for thermostatic super fine aluminum material for POF Chet diaphragm seal system. The cutter is characterized by a relatively thin sealing line, anti-stick. In addition, for the case of packaging sizes, automatic shrink packaging machine can adjust within a certain range, do not replace the abrasive. At the same time can be adjusted manually as well as parts of the furnace temperature and heat-shrinkable shrink packaging speed. The products are widely used in pharmaceutical, food, stationery, cosmetics, electronic products, toys and other fields. First bagging packaging machine set up heating time After pressing the button to manually or automatically, rack cylinder solenoid valve is energized output driven gear, gear drive chain, this time after rack cylinder proximity switch is turned off. When the rack moves to the top dead center of the cylinder, the cylinder rack proximity switch turns the front position, the oven was electric solenoid valve cylinder output. Oven-cylinder run to the top dead center, the timer (see below) start start delay, the solenoid valve power cylinder rack. Timer expires, the oven cylinder valve off.