Brief Introduction to Common Types and Characteristics of Printing Blanket

1. Full air blanket

Suitable for high-speed rotation, press and high-speed leaf machines. The best elasticity of recovery, the best resistance to stretching, and long life. The surface is finely ground and compensates for poor quality paper.

Air cushion eraser

Full version and outlet performance. The surface is a mixture layer, easy to clean, long-term use, the surface is not easy to leave imprints.

3. Three-in-one blanket

The splicing layer is integrally molded to withstand the strongest in India; in the middle cushion layer, the frequency of replacing the backing paper does not have to be increased. The bottom is waterproof and anti-solvent, it will not be uneven due to water absorption, resulting in uneven pressure. The blanket surface is specially treated with charcoal and is resistant to large and small sizes.

4. General air cushion blanket

Suitable for non-coated paper printing and board printing. Surface grinding particle size of 6u ~ 8u, the most suitable papermaking poor paper printing.

5. Traditional blanket

Good oil resistance on the surface, ie long-term cleaning with solvents such as regular gasoline, is also not likely to cause photochemical glazes and sticky rubber.

6.UV special blanket

The mixture of anti-UV resin ingredients, UV-resistant, rubber is not easy to powder. Fast recovery, no paper cuts due to size printing.

7. Partially coated blanket

Special coupling layer, cutting layer and non-cutting layer at the junction, the hardness can be resistant to cutting, uniform carrying capacity, improve the glazing effect. After cutting, tear the edges without burrs and smooth the coating.

8. Metal Printing Blanket

A blanket developed for two-piece metal printing. Pre-coated self-adhesive. Gum homogeneous without bubbles. Make printing pressure more even.

9. Anti-friction blanket

The surface rubber mixture contains high-hardness carbon molecules, which greatly improves the friction resistance. Applicable to concave and convex surface printed material. The rubber surface is not easy to wear and prolong the use of time.

10. Paper cup special blanket

No underlying canvas layer, moderate hardness, make ink transfer more complete. The adhesiveness of the double-sided adhesive tape is greatly improved, it does not slip off, and the expensive double-sided adhesive tape is saved.

11.UV self-adhesive blanket

Then the best glue viscosity, to prevent damage to the tear angle. The rubber surface contains UV-resistive UV resin for extended life in UV printing.

12. Report machine self-adhesive blanket

The report printer has a long history of grey blankets. The hardness is softer and the foam adhesive is used. To prevent the softening of the rubber when it is stored.

13. Report machine self-adhesive blanket

High viscosity adhesive, plastic deformation, degumming. Removing the blanket does not leave any residue that is difficult to remove. Good solvent resistance. Can be used for UV inks.