Maintaining a stable temperature inside the carbon dioxide incubator in Shanghai Xinzhuang is crucial for ensuring healthy and consistent cell growth. A precise and dependable temperature control system is essential to achieve this goal. To enhance the stability and reliability of the incubator, we strongly recommend selecting a model equipped with an independent triple temperature control system. This includes internal chamber temperature regulation, over-temperature alarm monitoring, and ambient temperature tracking—each playing a vital role in maintaining optimal conditions.
**Usage Precautions:**
1. Always ensure the incubator door is fully closed to prevent gas leakage, which could compromise test results.
2. After the refrigeration system has been turned off, wipe the interior chamber and the observation window with a soft cloth to maintain cleanliness.
3. Before shutting down the device, make sure all control switches are in the off position and disconnect the power supply.
4. Place the incubator on a flat, stable surface in a clean, dry, and well-ventilated area.
5. Avoid adjusting the inflow gas pressure too high, as it may cause damage to the tubing or sensors.
6. Before starting the incubator, confirm that all control switches are in the non-operational state and set the speed control knob to the minimum position.
7. Regular maintenance and proper usage can significantly extend the lifespan of the equipment and ensure it remains in top working condition.
8. Do not use the incubator for cultivating materials containing volatile solvents, low-concentration flammable gases, or toxic substances.
9. Keep the air inside the incubator clean and disinfect it regularly. Monitor the water level in the humidification tank to maintain proper humidity and prevent evaporation of the culture medium.
10. During continuous operation, perform routine inspections every three months. Check for dust, debris, or moisture entering the motor and refrigeration components. Clean the compressor and condenser, and inspect fuses, control elements, and fastening screws.
Shanghai Xinzhuang is a leading manufacturer of laboratory equipment, including solid-phase extraction systems. With advanced technology and a commitment to quality, we welcome your inquiries and look forward to serving you.
Silicone Glass Lid,Tempered Glass Lid With Big Hole,Oval Silicone Glass Lid,Square Silicone Glass Lid
Hebei Bozheng Glasswork Co.,Ltd , https://www.bozhengglass.com