Desktop computers are a must-have for the company, but as the machine takes longer and longer, the computer will have a variety of problems, the most common of which is the computer crashes and runs slower. The important reason is that the dust accumulation inside the main unit affects the normal operation of the computer. In severe cases, it will cause the computer to be short-circuited or even burn out the circuit. So it's best to clean your computer often.
Pre-tool preparation:
There is no need to have a lot of large tools to clean the computer. The general daily necessities can be operated. For example, we use discarded toothbrushes and hair dryers.
Steps:
Step 1: When cleaning the desktop computer, be sure to unplug all the main box wires, then screw the screws directly by hand. Note that there are four large screws, use your hand to turn left, then hand to the side. Take off the cover.
Step 2: After opening the main unit, you can see the radiator, which is a small electric fan, which needs to be removed. Rotate the knobs around the heat sink in the same direction, then hold the heat sink with your hand and remove it.
Step 3: After removing the heat sink, there is a piece of metal on the heat sink. There is a lot of dust inside. It takes only a little effort to remove the heat sink, and it can be removed by rotating it from side to side.
Step 4: After the heat sink is taken down, you will see a lot of dust inside. This dust will affect the operation of the heat sink, thus affecting the heat dissipation effect. If there is too much dust, there will be a large machine sound during operation, which will affect the work. . Use a brush to clean it, then use a hair dryer to blow it off until it is cleaned of dust.
Step 5: Although the main dust on the desktop computer is concentrated on the heat sink, there is still a lot of dust on the motherboard and the CPU. Use a brush to brush most of the dust or loose the brush, then use a hair dryer to blow. Medium heat is the best gear. After cleaning, to achieve the CPU brightness, the dust on the motherboard is less, so that is completed, after the cleaning is completed, you can install the radiator. Thermal grease should also be applied to the cpu.
Step 6: Install the heatsink This is the key. When installing, it's not as easy as taking it. Here's a little trick. Turn the several fixing knobs of the heat sink into the same direction, then align the heat sink with a few holes inside. Insert a few holes first, and use a screwdriver to hold a tubular thing under the fixed foot. Then press and hold to insert the remaining fixed feet into it.
Step 7: Insert the heat sink wire into the original removed position and install it.
Step 8: The final step is to cover the panel of the main unit, then tighten the screws, and the entire cleaning operation is perfectly finished. When you turn on the computer, do you find that the sound of the main chassis is getting smaller and the speed of operation is getting faster.
In addition, if the office environment we are in is not much dust, then it is necessary to carry out a large cleaning of the desktop computer for at least 2 years. It is better once a year; if there is too much dust, it will take several months to clean it to ensure the cleanness of the main box. So that the computer life can be longer.
Study Desk Chair Set,Computer Table For Kids,Kids Art Desk,Modern Kids Table Chair
SUZHOU IGROW TECHNOLOGY CO.,LTO , https://www.igrowdesk.com