Many customers have not purchased the ozone aging test chamber for the first time. They did not have a detailed understanding of the test box. After buying it, the result is that the test box cannot work immediately due to various reasons. This is a major cause for customers. The following is a brief description of the ozone aging test chamber installation site:
First, the site conditions 1. The ground level, good ventilation 2. No strong electromagnetic field around the equipment 3. No strong vibration around the equipment 4. No flammable, explosive, corrosive substances and dust around the equipment 5. Appropriate around the equipment Use and maintenance space II. Power supply conditions Power supply requirements: AC380V±10% 50±0.5Hz Three-phase five-wire system (Note: The user needs to configure the air or power switch of the corresponding capacity for the test box at the installation site, and this switch must be independent. For use with this device)
Third, the environmental conditions The ambient temperature around the test chamber must be maintained between 5 ° C ~ +30 ° C (average temperature within 24 hours ≤ 30 ° C), ambient humidity ≤ 85% RH.
Fourth, the water supply conditions It is best to use pure water, distilled water, deionized water. Resistivity ≥500Ω.m
V. Other precautions If the test box door is opened several times during the working process or open for a long time, the temperature and humidity in the box will fluctuate, which will affect the test results. If it is serious, the heat exchanger of the refrigeration system may freeze. normal work. Therefore, Xiaobian reminds everyone here that during the working process of the test box, it is best not to open the door of the test box easily.
First, the site conditions 1. The ground level, good ventilation 2. No strong electromagnetic field around the equipment 3. No strong vibration around the equipment 4. No flammable, explosive, corrosive substances and dust around the equipment 5. Appropriate around the equipment Use and maintenance space II. Power supply conditions Power supply requirements: AC380V±10% 50±0.5Hz Three-phase five-wire system (Note: The user needs to configure the air or power switch of the corresponding capacity for the test box at the installation site, and this switch must be independent. For use with this device)
Third, the environmental conditions The ambient temperature around the test chamber must be maintained between 5 ° C ~ +30 ° C (average temperature within 24 hours ≤ 30 ° C), ambient humidity ≤ 85% RH.
Fourth, the water supply conditions It is best to use pure water, distilled water, deionized water. Resistivity ≥500Ω.m
V. Other precautions If the test box door is opened several times during the working process or open for a long time, the temperature and humidity in the box will fluctuate, which will affect the test results. If it is serious, the heat exchanger of the refrigeration system may freeze. normal work. Therefore, Xiaobian reminds everyone here that during the working process of the test box, it is best not to open the door of the test box easily.
Can Opener, or tin opener is a kitchen device used to open metal containers and cans. The early openers were basically variations of a knife, and the first can opener consisting of the now familiar sharp rotating cutting wheel but was considered too difficult to operate for the ordinary consumer. This easy-to-use design has become one of the most popular can opener models.
You may think all cans now open with ring-pulls, but you can guarantee it'll be that essential ingredient that comes in a good old-fashioned closed tin.
Can Opener
Kitchenaid Can Opener,Can Opener,Manual Can Opener,Safety Can Opener
V-Boom's Industrial Co.Ltd , https://www.v-booms.com