In order to meet the market's requirements for anti-counterfeiting functions, since the early 1990s, the packaging industry related personnel have applied holographic labeling, holographic hot stamping, and later high-end positioning holographic hot stamping technology. However, as the market demands for environmental protection and anti-counterfeiting are increasing, people are constantly looking for surface processing methods that are more cost-effective, more efficient, more environmentally friendly, and have good anti-counterfeiting properties without affecting the layout design.
The cover of this issue is a typical print made to meet the above requirements. The following is the production process of the cover for the reader's reference.
1. Purpose of production
A cover with a multi-meaning hologram (non-pattern).
2. Production requirements
The process is simple and does not exceed 3 processes (including printing ).
3. Design direction
Design a printing layout that can match more than three holographic images. At least one holographic image in the layout is meaningful and can be matched with the layout to represent the positioning features.
4. Final design
With the cooperation of the device and the positioning film, the multiple holographic effect can be cast at one time on the printed cover. Since three processes are allowed in the production requirements, the designer can use the same equipment to cold-press the printed cover first, and then use the positioning function of the device to position the holographic film to cast different holographic images to the printed one at a time. On the cover.
5. Using the device
MMT's patented C-square equipment (can be used for cold foiling and casting processes).
6. Process effect analysis
(1) Multiple holographic effects increase the cost of counterfeiting, but the product itself does not increase the cost.
(2) The holographic effect of mutual fusion, combined with the characteristics of the positioning film and the special functions of the equipment, the anti-counterfeiting strength and decorative effect of the product are further improved.
(3) Special transition effect - The casting process combined with cold-hot or aluminized cardboard can produce the effect of transitioning from a metallic holographic pattern to a metal-free printed area. This unique effect will not only give the designer more design space, but also enhance the anti-counterfeiting strength of the product.
The highlighter brush is a makeup brush with bristles in the shape of a flame or a fan. It is used to apply highlights to the forehead, cheekbones, bridge of the nose, brow bone, etc., to make them prominent, full and shiny.
Basic information editing
When using the highlight brush, hit the highlight on the forehead, cheekbones, bridge of the nose, brow bone, etc. to make it prominent, full and shiny. Most of the highlights are white powders, which are usually used together with shadow powders to make the face look three-dimensional and sharp.
How to use
The flame brush or fan-shaped brush is directly dipped in the high-gloss product and applied to the cheekbones, bridge of the nose, forehead, etc. After performing a small area of smearing, the entire makeup look natural and comfortable.
step:
(1) T-shaped face
Use a highlighter brush to dip a small amount of highlighter powder and swipe the upper part of the eyebrow slightly. Be careful not to apply the highlighter too high, and then apply the highlighter to the bridge of the nose. You can also apply a little to the nose. width.
(2) The sacrum
Hit the highlights from the top of the cheekbones to the corners of the eyes.
(3) Brow bone
Use the highlight brush to brush the highlights under and above the brow bones and eyebrows to make the brow bone more prominent and the face contour more three-dimensional.
(4) other parts
Gently brush the highlights on the jaw, upper eyelid and corner of the mouth.
Highlighter Powder,Glow Kit,Face Highlighter,Highlighter Contour
HENAN BON INDUSTRIAL(COSMETIC) CO.,LTD , https://www.boncosmetic.com