With the maturity of the domestic furniture market, furniture companies have begun to carry out more specialized subdivisions. The more obvious example is the flourishing development of customized furniture in China. The fire of the stars can be used to pour the original momentum, and the competition in the market is fierce. Not as good as finished furniture. However, there are still many consumers who don’t know enough about the characteristics of handmade furniture, finished furniture and custom furniture. There are still many people in the third- and fourth-tier cities who think that it is the best way to make furniture. Some people still only know the finished furniture, and they still have to I don't know if there is custom furniture. The purpose of this article is to compare and explain the characteristics of the three types of furniture on the market. I hope that everyone will not be confused about how to buy furniture during the home decoration process.
First, hand-made furniture
1. Production location: The decoration site may cause pollution to the environment and may generate noise;
2, the use of equipment: simple handheld devices, or simple electric equipment;
3, the use of plates: large core board, solid wood, etc.;
4, the production process: hand-made, subject to personal factors, the production process is difficult to ensure; the cutting edge is not smooth enough, the details are not in place;
5, environmental performance: large core board, because in the production process, the use of urethane aldehyde, a large number of large core boards meet the environmental requirements of home improvement, so it is not recommended; some consumers require the use of solid wood furniture, There are also problems in this way. The woodwork purchases all the raw materials, only after the general drying process, there is the possibility of traces in the future use process. In addition, if the paint is needed, it must be done on site, and it is bound to be the living room environment. Causing long-term effects;
6. Coordination of products and decoration: The carpentry master who made the furniture, what kind of style he learned from his teacher, what style is given to you, the style changes, very little, the same, it will not be The overall decoration style of your home is considered;
7, personalization: simply can not talk about personalized furniture.
Second, finished furniture
1. Production location: The production workshop of the factory, there is no problem caused by the production of furniture on site;
2, the use of equipment: electronic cutting saw, paint room, etc., the production level is greatly improved, product accuracy, accuracy is greatly improved;
3, the use of plates: MDF, particle board, solid wood, etc.;
4, the production process: the combination of labor and machinery, the intervention of large-scale machine tools, so that the production capacity is greatly improved, saving labor time, the cost of single products is greatly reduced;
5, environmental performance: domestic finished furniture manufacturers are mixed, there is no shortage of fish, mixed with raw materials, environmental protection can not be guaranteed, so when buying furniture products, you must ask what is the substrate used, brand name, Origin, the latest environmental report, sales authorization and other qualifications, if necessary, you can send the relevant departments to do the test;
6, the coordination of product and decoration: the purchase surface is very narrow, what the seller sells, consumers can only buy what, often there is a strange space in a customer's home, because of the limitations of the finished furniture, can not be used The situation of getting up; there are also more persevering people, will go to the market to find the right products, but after all, it is a needle in a haystack;
7. Personalization: It is already a good furniture, and it is there. If it is the best with your taste, if it is not suitable, then you can only continue to take a walk, you can't design for your own habits. The layout cannot be used according to its own space. It cannot be said that the finished furniture does not meet the individual needs of people. It can only be said that it is difficult to meet this demand.
Related reading: Which is more cost-effective and safer for woodworking furniture than finished furniture?
Third, custom furniture
1. Production location: The production workshop of the factory, there is no problem caused by the production of furniture on site;
2, the use of equipment: electronic cutting saw, paint room, etc., the production level is greatly improved, product accuracy, accuracy is greatly improved; automatic edge banding machine, each piece of sheet is edged, and is surrounded by four sides, maximized reduction Release of small harmful gases;
3, the use of plates: MDF, particle board, solid wood, etc.;
4. Production process: the combination of manual and mechanical, the use of large-scale electronic cutting saws and automatic edge banding machines, the production capacity is greatly improved, labor time is saved, and the cost per item is greatly reduced;
5, environmental performance: different from the finished furniture, first of all, custom furniture mostly for the use of the board to do four sides of the edge treatment, in doing so, the role of environmental protection is to minimize the harmful gases such as formaldehyde per unit time The amount of release; Secondly, the plates used by the first-line custom furniture brands on the market are some of the mainstream brands on the market and the plates of international brands. Once problems are encountered, they can be checked.
6, the coordination of product and decoration: Orsay custom furniture recommended consumers first design furniture, and then do the overall decoration design, let the home decoration design to refer to the furniture program to do home improvement design.
There are two advantages to this: 1. The furniture designer can design the furniture that perfectly meets your needs according to the members, living habits, and living environment of your home, and use the space of some “chicken ribs†efficiently. 2, home improvement designers can also optimize his plan according to your furniture plan, such as the position of the lamp should not be with the furniture door, such as electrical changes, to take into account the switch, the panel position of the socket. Custom furniture and decoration, never separated.
7, personalization: This is the area where custom furniture is best at, custom furniture can appear, is to meet the needs of customers more personalized goods.
in conclusion:
Manufacture of furniture: can be customized, but the process is rough, not environmentally friendly, and lacks in meeting individual needs;
Finished furniture: good craftsmanship, environmental protection can basically be guaranteed, but not customizable;
Custom furniture: good craftsmanship, environmental protection can be guaranteed, can be customized to meet individual needs.
Electric Pepper Mill,Electric Mill,Electric Spice Grinder,Automatic Salt Pepper Grinder
Yongkang Lianyang Industry & Trade Co., Ltd , https://www.yklianyang.com