Steel strand fatigue testing machine

Steel strand fatigue testing machine



The high-frequency steel strand fatigue testing machine is a special steel strand fixture added to the resonance machine, which is specially used for the fatigue life research of the steel strand. It is the most advanced steel strand fatigue testing machine in the world. Economic benefits.
The high-frequency fatigue testing machine is used to measure the fatigue characteristics and fatigue of metal, alloy materials and their components (such as operating joints, fixed parts, spiral moving parts, etc.) at room temperature under tensile, compression or tensile and compression alternating load Life, prefabricated cracks and crack propagation tests. After equipped with corresponding test fixtures, the high-frequency fatigue testing machine can carry out three-point bending test, four-point bending test, thin plate tensile test, thick plate tensile test, reinforced steel strip tensile test, chain tensile under sinusoidal load Test, fixed part test, connecting rod test, torsional fatigue test, bending-torsion composite fatigue test, interactive bending fatigue test, CT test, CCT test, gear fatigue test.
The Sincotec resonance test system can efficiently and cost-effectively perform fatigue tests on materials and components. Resonant excitation systems generate dynamic loads around the resonance frequency. According to the different forms of excitation, Sincotec can provide two systems, motor-excited (MAG) or electromagnetic-excited. The operating point of the system is located at the peak or the rise of the resonance curve. The resonance test system has its unique working principle. The working energy consumption is very low (usually only a few kilowatts); while the working frequency is as high as 300Hz. It is the cycle that greatly shortens the fatigue test. Because the stiffness of the test piece is very sensitive to cracks, the resonance system can detect the formation of cracks very accurately. The resonance system is very suitable for fatigue test, fracture toughness test and crack growth test. Sincotec's advanced digital control technology not only enables the resonance system to perform traditional force control, but also can cooperate with various displacement sensors for displacement control and strain control. Greatly broadened the application of resonance test system. At the same time, Sincotec also provides various accessories, such as: fixtures, environmental boxes, high temperature furnaces, corrosion boxes, extensometers, etc., in conjunction with the MAG / MOT system to obtain complete material test data. Steel strand fatigue testing machine
The high-frequency steel strand fatigue testing machine is a special steel strand fixture added to the resonance machine, which is specially used for the fatigue life research of the steel strand. It is the most advanced steel strand fatigue testing machine in the world. Economic benefits.
High frequency fatigue testing machine technical consultation 13581584194
The high-frequency fatigue testing machine is used to measure the fatigue characteristics and fatigue of metal, alloy materials and their components (such as operating joints, fixed parts, spiral moving parts, etc.) at room temperature under tensile, compression or tensile and compression alternating load Life, prefabricated cracks and crack propagation tests. After equipped with corresponding test fixtures, the high-frequency fatigue testing machine can carry out three-point bending test, four-point bending test, thin plate tensile test, thick plate tensile test, reinforced steel strip tensile test, chain tensile under sinusoidal load Test, fixed part test, connecting rod test, torsional fatigue test, bending-torsion composite fatigue test, interactive bending fatigue test, CT test, CCT test, gear fatigue test.
The Sincotec resonance test system can efficiently and cost-effectively perform fatigue tests on materials and components. Resonant excitation systems generate dynamic loads around the resonance frequency. According to the different forms of excitation, Sincotec can provide two systems, motor-excited (MAG) or electromagnetic-excited. The operating point of the system is located at the peak or the rise of the resonance curve. The resonance test system has its unique working principle. The working energy consumption is very low (usually only a few kilowatts); while the working frequency is as high as 300Hz. It is the cycle that greatly shortens the fatigue test. Because the stiffness of the test piece is very sensitive to cracks, the resonance system can detect the formation of cracks very accurately. The resonance system is very suitable for fatigue test, fracture toughness test and crack growth test. Sincotec's advanced digital control technology not only enables the resonance system to perform traditional force control, but also can cooperate with various displacement sensors for displacement control and strain control. Greatly broadened the application of resonance test system. At the same time, Sincotec also provides various accessories, such as: fixtures, environmental boxes, high temperature furnaces, corrosion boxes, extensometers, etc., in conjunction with the MAG / MOT system to obtain complete material test data.