According to statistics, as of the end of 1997, 1,135 of China's two-level book and periodical printing companies had 1132 collectively-controlled linkage lines, 254 wireless adhesive-binding lines, and 63 (sets) of hardcover production lines and stand-alone machines. In 1998, the bookbinding volume of 113 book publishers across the country totaled more than 16 million reams.
In recent years, due to the influence of subjective and objective factors and consumer demand, the domestic book printing and printing companies have greatly improved the number of glue-binding production lines and hardcover installations, and the domestic binding market pattern and business types are also undergoing. Dramatic changes, whether these signs indicate that the Chinese imprinter is also trying to keep up with the international development trend?
In order to find the answer, we have interviewed Han Shanning, the general manager of Nanjing Aide Printing Co., Ltd., which is in the forefront of the comprehensive efficiency of the domestic book and book printing industry in recent years.
1. The demand for binding finishing equipment has increased In the past two years, a number of regional book publishing houses have introduced or planned to introduce binding equipment with advanced international standards. This is obviously driven by subjective and objective factors and market demand. On a large scale, firstly, domestic book printing and printing plants have increasingly felt the pressure from electronic publications and networks. In order to survive and develop, companies are striving to adapt to the development needs of the new situation; With further reforms and opening up of the market, industry authorities and publishers have further requirements for the book publishing environment and boutique book strategies. On the small scale, with the large number of books and magazines in the pre-press and printing process, a large number of technical transformation investment, the binding and obstruction of the binding is more obvious, so the technical transformation of the binding process is also a matter of course.
Accompanied by these enterprises with comprehensive strength, through the introduction of high-level advanced equipment to bring their own strength to a new level, the relevant departments of the State have also regulated and rectified the current uneven printing industry. This two-pronged approach will, on the one hand, eliminate those small enterprises that are difficult to maintain, and will also retain some of the unique binding and processing companies as a useful supplement to the increasingly fiercely competitive domestic publishing and printing industry.
2. The regional binding base and printing and printing integration have a strong regional nature. Because it has logistics distribution, there is a difference in specifications, there are a large number of small differences, so it can only be in a certain area of ​​feature processing services. Hardcover, luxury and special equipment can be completed in a regional binding company base. With this specialized division of labor and collaboration to achieve the goal of increasing effective investment, expanding business volume, and reducing the cost burden, some common bindings are still required to be completed by the printing companies themselves.
As for the binding bases, which are printed by large-scale book printing companies, or by professional binding and processing companies, the current situation is definitely the former. Nanjing Aide Printing Co., Ltd. currently has 1,000 ready-to-use hardcover lines. At the same time, each section of the hardcover line is open to social business, which has produced very good economic benefits and has a demonstration effect.
At present, this kind of regional bookbinding base has taken shape; the North China plate, the Yangtze River Delta plate, the Pearl River Delta plate, and the Shandong plate, headed by Beijing. This kind of binding area, which is formed naturally by the market division, may constrain the rush of investment in the binding equipment.
3, the effect of frame decoration needs to be improved In recent years, with the upgrading of binding equipment and binding materials, the domestic books and magazines have greatly improved the level of bookbinding processing technology, it will be with the corresponding level of finishing decoration processing The slower growth means that both hardcover and undressed are uniform and featureless.
At present, the overall level of decoration of domestic books and magazines is higher in the south than in the north. This is in line with the general pattern that the development of economy and commerce will drive the improvement of cultural tastes and levels. For this reason, the mainland's fine books were taken to the south for processing, and the high-end book production companies were mainly in the south.
According to the analysis, the reason why the level of binding and trimming of domestic books and magazines has not been able to develop in parallel with the binding level is due to cost and price reasons (the vast majority of publications in the country want the cost of binding and finishing to be low), and the second is the binding. Designers and finishing technicians are at the level of control.
However, with the further development of demand for multi-species, multi-batch, and quality books, gifts and books, the cost of tetracycline will be tilted in favor of improving the level of binding and finishing; Further understanding of the binding materials, many of the popular decoration effects in foreign countries will be better applied to the case of domestic books and books after the binding process.
For binding and binding of raw and auxiliary materials, such as adhesives, jams and cloths, book covers, etc., book printing and printing plants are mostly made domestically, mainly because domestic raw and auxiliary materials are of good quality and reasonable price, and they can keep the cost of binding low. A certain role, in line with the actual national conditions.
From the near-term view, the effect of the binding and decoration of the book and hardcover books in the world is still a function of the use and beautification of the cover, book back and incision, especially the cover of the novel book and the hardcover book bookcase. .
Through the combination of electro-aluminum stamping, embossing, partial glazing, hot-melt printing and other post-printing processes, it is possible to create effects with strong visual and tactile impact, hot-pressing, hot-melt embossing, Crystalline Refraction, etc., have been widely used for the finishing of paperback book covers. The processing and finishing of hardcover book and booklet are characterized by their exquisite fabrics, traditional finishing such as embossing, hot stamping and rubbing of gold edges. Techniques and effects. (Finish)
In recent years, due to the influence of subjective and objective factors and consumer demand, the domestic book printing and printing companies have greatly improved the number of glue-binding production lines and hardcover installations, and the domestic binding market pattern and business types are also undergoing. Dramatic changes, whether these signs indicate that the Chinese imprinter is also trying to keep up with the international development trend?
In order to find the answer, we have interviewed Han Shanning, the general manager of Nanjing Aide Printing Co., Ltd., which is in the forefront of the comprehensive efficiency of the domestic book and book printing industry in recent years.
1. The demand for binding finishing equipment has increased In the past two years, a number of regional book publishing houses have introduced or planned to introduce binding equipment with advanced international standards. This is obviously driven by subjective and objective factors and market demand. On a large scale, firstly, domestic book printing and printing plants have increasingly felt the pressure from electronic publications and networks. In order to survive and develop, companies are striving to adapt to the development needs of the new situation; With further reforms and opening up of the market, industry authorities and publishers have further requirements for the book publishing environment and boutique book strategies. On the small scale, with the large number of books and magazines in the pre-press and printing process, a large number of technical transformation investment, the binding and obstruction of the binding is more obvious, so the technical transformation of the binding process is also a matter of course.
Accompanied by these enterprises with comprehensive strength, through the introduction of high-level advanced equipment to bring their own strength to a new level, the relevant departments of the State have also regulated and rectified the current uneven printing industry. This two-pronged approach will, on the one hand, eliminate those small enterprises that are difficult to maintain, and will also retain some of the unique binding and processing companies as a useful supplement to the increasingly fiercely competitive domestic publishing and printing industry.
2. The regional binding base and printing and printing integration have a strong regional nature. Because it has logistics distribution, there is a difference in specifications, there are a large number of small differences, so it can only be in a certain area of ​​feature processing services. Hardcover, luxury and special equipment can be completed in a regional binding company base. With this specialized division of labor and collaboration to achieve the goal of increasing effective investment, expanding business volume, and reducing the cost burden, some common bindings are still required to be completed by the printing companies themselves.
As for the binding bases, which are printed by large-scale book printing companies, or by professional binding and processing companies, the current situation is definitely the former. Nanjing Aide Printing Co., Ltd. currently has 1,000 ready-to-use hardcover lines. At the same time, each section of the hardcover line is open to social business, which has produced very good economic benefits and has a demonstration effect.
At present, this kind of regional bookbinding base has taken shape; the North China plate, the Yangtze River Delta plate, the Pearl River Delta plate, and the Shandong plate, headed by Beijing. This kind of binding area, which is formed naturally by the market division, may constrain the rush of investment in the binding equipment.
3, the effect of frame decoration needs to be improved In recent years, with the upgrading of binding equipment and binding materials, the domestic books and magazines have greatly improved the level of bookbinding processing technology, it will be with the corresponding level of finishing decoration processing The slower growth means that both hardcover and undressed are uniform and featureless.
At present, the overall level of decoration of domestic books and magazines is higher in the south than in the north. This is in line with the general pattern that the development of economy and commerce will drive the improvement of cultural tastes and levels. For this reason, the mainland's fine books were taken to the south for processing, and the high-end book production companies were mainly in the south.
According to the analysis, the reason why the level of binding and trimming of domestic books and magazines has not been able to develop in parallel with the binding level is due to cost and price reasons (the vast majority of publications in the country want the cost of binding and finishing to be low), and the second is the binding. Designers and finishing technicians are at the level of control.
However, with the further development of demand for multi-species, multi-batch, and quality books, gifts and books, the cost of tetracycline will be tilted in favor of improving the level of binding and finishing; Further understanding of the binding materials, many of the popular decoration effects in foreign countries will be better applied to the case of domestic books and books after the binding process.
For binding and binding of raw and auxiliary materials, such as adhesives, jams and cloths, book covers, etc., book printing and printing plants are mostly made domestically, mainly because domestic raw and auxiliary materials are of good quality and reasonable price, and they can keep the cost of binding low. A certain role, in line with the actual national conditions.
From the near-term view, the effect of the binding and decoration of the book and hardcover books in the world is still a function of the use and beautification of the cover, book back and incision, especially the cover of the novel book and the hardcover book bookcase. .
Through the combination of electro-aluminum stamping, embossing, partial glazing, hot-melt printing and other post-printing processes, it is possible to create effects with strong visual and tactile impact, hot-pressing, hot-melt embossing, Crystalline Refraction, etc., have been widely used for the finishing of paperback book covers. The processing and finishing of hardcover book and booklet are characterized by their exquisite fabrics, traditional finishing such as embossing, hot stamping and rubbing of gold edges. Techniques and effects. (Finish)
Leisure Bag,Leisure Luggage ,Cheap Luggage ,Designer Handbags
Travel Bag Co., Ltd. , http://www.nbluggagebag.com