Brief Analysis of IC Card Elevator Control and Charging System

(1) System background

In recent years, with the rapid development of the real estate industry, the state-sponsored energy-saving and land-saving housing construction policies have been widely implemented, and high-rise residential construction has gradually become the main body of real estate development and consumption. At the same time, it has brought many new problems and difficulties to the after-sales property management. The most prominent ones are the use of elevator equipment, maintenance, high management costs and difficulties in property charging. With the development and application of the IC card elevator control management system, it provides technical support for solving the above problems and creates a new environment for property management.

(two) system introduction

IC card elevator control and charging system is a complete intelligent elevator control system integrating computer technology, network technology, automatic control technology and IC card sensing technology. Mainly: floor control type, call control type. At the same time, it has the functions of control and charging.

This project uses:

Floor control type (internal call control): The user swipes the card after entering the car, and then selects the desired floor (the selected floor must be an authorized floor, and the unauthorized floor cannot be selected).

Call control type (outgoing call control): When calling the call, first swipe the card, then press the call button, the elevator door opens, otherwise the call cannot be called;

The system consists of five parts: management software, card writer, contactless IC card, card reader, controller.

(3) System functions and features

Function: management function, charging function, no-fee floor limited function.

Features: energy saving, consumption reduction, safety, reliability, convenience, practicality and convenient management.

A, management function

The system greatly facilitates the management of the elevators by the property company, and is known as the “good helper for property management”.

Effectively shield the idle personnel, and insured the security in the community, truly: "One card in hand, the property has no worries."

The charging method can be changed from passive to active, forcing the owner to pay the relevant expenses to the management center on time.

Main features:

All IC cards must be authorized or recharged by the system administrator before they can be used;

You can arbitrarily set the IC card permissions as required (for example, full-layer cards or single-layer permission cards, etc., unauthorized access to other areas and floors outside the authority);

When you take the ladder, you need to use the card first, so that no card or unauthorized personnel can not enter and use the elevator, which can effectively save a lot of power loss;

When the user swipes the card, the IC card internal call controller in the car will only turn on the corresponding floor button according to the authorized floor information in the IC card, and the other floor buttons are invalid. It can effectively prevent children from playing, playing, chasing and playing in the elevator, enhancing safety and facilitating management.

If there is a charge request, the internal call controller will also deduct the amount in the IC card when the card is swiped;

Has a loss reporting function to prevent card loss from being illegally used by illegal users;

With blacklist setting function, the property can cancel or restore its permission to use the elevator without notifying the owner;

The system stores the relevant information (including the user card number, the usage time, the elevator code used, the floor reached, etc.) when the elevator is successfully used for the purpose of counting, printing, archiving, and querying;

B. The function of single charge can be implemented according to the needs of management.

Single charge function (This function is similar to the bus IC card system. When the card is swiped, the single charge is deducted immediately, and it is used after recharging first).

At present, the principle of elevator charging is mostly the households' equal sharing. Therefore, most of the owners' opinions suggest that more fees should be used and less fees should be paid less. The residents of the initial floor do not use the elevator. If they do not purchase the card, they do not have to pay the elevator usage fee, but they must pay the basic fee (annual inspection fee plus maintenance fee, etc.). For other floors, the sub-floor breakdown fee can also be implemented. The elevator fee should be charged different fees according to the floor. However, the housing management department said that this practice is currently very difficult in practice. The advent of the IC card elevator charging and management system of our company can solve this problem very easily. At this time, the property company can charge according to the specific situation according to the specific situation, or it can be tiered and divided into sections and charges on time. It is fair and reasonable to use one card and pay the fee first.

Card classification and function

1, deduction card

The card is used by ordinary elevator passengers. One person and one card can only reach the designated floor by boarding the ladder. When using, first recharge, when the passenger enters the car, the IC card is close to the IC card reader, and the instruction card reader in the elevator IC card will automatically recognize the legality of the IC card. If the card is legal and the single fee is deducted, the passenger button selects the floor, the system automatically lights up the summoning light you want to go to the floor, and stops at the landing. If the card is illegal or has no card, the passenger cannot press the summoning light and cannot achieve the purpose of the card riding. Brush the same card in 10 seconds without deduction to avoid misreading and misleading fees.

2, time card

The system has a function similar to the bus IC card, and the households use the elevator to charge the card. Each IC card issued to the user has the corresponding permission to use, that is, the IC card is set by the property company, and the resident holds the valid IC card, and can use the IC card to reach the floor or other sharing in an effective time. floor. The property company can set up the charge management according to the characteristics of IC card time limit, limited layer and limit. For example, if a user lives on the third floor, the management center stipulates that 30 yuan of elevator usage fee should be paid every month. If the user pays the property company 90 yuan for the fee on January 1, the property company can use the IC for the user. If the card is set to be a valid card from January 1st to April 1st, if the user does not go to the property company to pay the elevator usage fee in April (the 4th month), the card will be If the user continues to go to the property company to pay the fee of 30 yuan, the property company will postpone the use of the IC card and extend the effective use period of the card to May 1.

3, the number of cards

The card is used by ordinary elevator passengers. One person and one card can only reach the designated floor by boarding the ladder. When using, first write the number, when the passenger enters the car, the IC card is close to the IC card reader, and the instruction card reader in the elevator IC card will automatically recognize the legality of the IC card. If the card is legal and deducted 1 time, the passenger button selects the floor, the system automatically lights up the summoning light you want to go to the floor, and stops at the landing. If the card is illegal or has no card, the passenger cannot press the summoning light and cannot achieve the purpose of the card riding. Brush the same card in 10 seconds, no deduction, to avoid misreading and deduction. This card can also be used as a guest card.

4, management card

The card is used by management personnel such as security guards and building management personnel. Blacklist management card, blacklist management card, time proof card, controller initialization card, etc. can be issued.

5, Tongka

The card is used by special passengers such as security guards, elevator maintenance personnel, building management personnel and personnel who can reach multiple floors. When the cardholder takes the elevator, the IC card is placed close to the elevator IC card reader, and the passenger can press the floor call button to be reached, and all the floors connected to the elevator controller can be reached.

C, system characteristics

The IC card layer control controller and the elevator itself system are connected by passive contacts, and the two are completely isolated, which will not have any impact on the original performance of the elevator;

It has a fire signal input interface. When the fire switch signal is activated, the IC card elevator system does not work, and the elevator returns to the original state;

One board can control 16 floors; for each additional floor expansion board, you can increase the control of 16 or 32 floors;

The motherboard is equipped with RS232 or RS485 communication interface. The management computer can collect data and parameter settings for the system through network or data collector, laptop, and handheld POS. (Handheld POS is optional);

With the handheld POS machine, as long as the parameters are set with the handheld POS and a parameter card, the parameters of the parameter card can be modified by the handheld POS machine on site, and the parameter card can be read on the card reader module of the elevator IC card control system. When collecting data, use the data cable to connect the handheld POS machine to the controller to collect. One elevator can be used at the same time, and the handheld is small in size, beautiful and elegant, and the display is intuitive (using LCD display). It is easy to carry and has high altitude. The price/performance ratio.

The system operation is very simple, only need to write the information to the setup card to the elevator card reader module to swipe the card, and the setting tone indicates that the setting is successful. You can also use the laptop to connect directly to the main control board with the data cable for related settings and modifications, and also set and modify it with the handheld.

The software is easy to install, simple to operate, complete in function and high in security.

Notice Board Felt Board

Felt Board,Single Sided Whiteboard,School Magnetic Board,Aluminum Frame Magnetic Whiteboard

WENYANG STATIONERY MANUFACTURING CO.,LTD. , https://www.marvelousboard.com

Posted on