As the festival approaches, give your home a neat, new look. In fact, the cleanliness of furniture is sometimes not complicated. Fabric sofa is one of the most difficult to clean furniture. Below, we take the fabric sofa as an example to demonstrate and introduce some small ways of furniture cleaning. Yinglun Huazhuang Furniture http://ylhz.cnjiaju.com/Share
PART1: Basic care
1. Fabric sofas should be vacuumed once a week, and each corner includes armrests, backrests and small gaps. It is more appropriate to clean with a vacuum cleaner or a towel. If a small brush is used, the texture of the fabric may be damaged and the fabric may be fluffy.
2. Fabric sofas are not as wear-resistant as leather sofas, so don't sit in the same place for a long time. If you find that the thread ends are loose, don't break them by hand. You should use scissors to cut them neatly.
3. If the sofa has stains, it is best to use a dry towel and a small amount of sofa cleaner to wipe repeatedly until it is removed, avoid cleaning with water, so as not to penetrate into the sofa interior, so that the sofa fabric is deformed by moisture.
4. The cleaning cycle of the fabric sofa is one year. After cleaning, please pay attention to clean the detergent with a dry towel.
5. Environmental factors such as temperature can cause the fiber to shrink, grow, loose and uneven to some extent, causing the sofa to deform. We can use the steam iron to remove the non-decorative folds on the sofa fabric, but it should be inconspicuous in the fabric first. The location is tested first and then fully rolled out.
PART2: Exposed wood care
We should periodically wipe with a clean wet cotton cloth in the direction of the wood grain. If necessary, use a furniture-specific polish to renew the coating on the exterior of the furniture.
There are two kinds of polishes, one is suitable for high-brightness coating, and the other is suitable for matt or matt coating. When using, care should be taken not to splash the polish on the textile.
PART3: Adjusting the cushion and cushion
The padding filler is composed of a mixture of fibers. The seat cushion and the pillow should be shaken once a week, whether used or not. This not only helps to adjust the density of the filler, but also distributes it evenly in the cushion cover. Wear of the fabric, control of the side slip at the seam of the pad and restore the position of the pad to the position before the movement, thereby avoiding the loss of the seam due to the friction caused by the misalignment of the cover. After using for a period of time, be sure to put it in the sun for a while, but when it is dry, it should be placed in a well-ventilated indirect sunlight.
PART4: Method for quickly processing stains
Food stains: A variety of juices such as splashes on the surface of the furniture will leave a slight stain, you should immediately wipe it off, and then use a clean soft cloth to glaze the stain.
Wax and chewing gum: Wrap the ice cube with a plastic film to harden the wax oil, then gently scrape off the wax stain with a blunt spatula or credit card, then use the furniture cleaner to remove the stain, wait until the surface is dry. Light.
Alcohol: Many liquids contain alcohol, such as alcohol, perfume, potion, and other household liquids, which dissolve the coating of the furniture. If it is accidentally splashed on the furniture, let the stains dry. If it is damaged, please consult the furniture repair specialist.
Nail polish and nail polish: These are dangerous solvents. If you leave a stain, do not wipe it, and drain it immediately. If there is damage, please consult the furniture repair specialist.
Photovoltaic(PV) Ground Screw
PV ground screw is a new type of solar photovoltaic supporting product, suitable for various solar photovoltaic, wind energy and construction industries, such as solar power station pile foundation, billboard pile foundation, sign flag pile foundation, wooden house pile foundation, etc., suitable for Various geology, such as clay, Gobi desert, gravel, etc., are favored by industry counterparts for their high load performance, stability, anti-settling and pull-out properties.
PV Ground screw is also called spiral ground pile, hot-dip galvanized spiral ground pile
Product specifications
Outer diameter 60mm---3000mm carbon steel Inner diameter 20mm---2500mm alloy steel
Pitch 60mm---3000mm stainless steel thickness 1.0mm---60.0mm
Detailed introduction:
Photovoltaic solar spiral pile is a kind of spiral drilling pile. Its characteristics include the connection of drill bit and drill pipe, drill bit or drill pipe connecting a power source. After this photovoltaic solar spiral pile is placed underground, it will no longer Take it out and use it directly as a pile.
The drill bit of the photovoltaic solar spiral pile includes the spiral drill bit at the bottom.
Specific structure:
1. Use steel pipe in the middle part
2. The top is the connecting pipe
3. The drill pipe of the photovoltaic solar spiral pile includes the upper connecting pipe
4. Steel rod in the middle part
5. The lower connecting shaft
6. After the pile is driven into the ground, it is no longer taken out, but used as a pile directly.
On the basis of the "end-bearing pile" structure and "friction pile" structure used in the construction process, it is widely used in the construction of a variety of ground piles, ground anchors, and randomly structured ground piles.
Photovoltaic(Pv) Ground Screw,Fence Post Ground Screw,Post Ground Screw,Screw Type Ground Anchors
Shijiazhuang Qiancen Industry Co.,ltd , https://www.yuyilang.com
