The thickness of the ink printed on the substrate has a great impact on product quality. The influence of the thickness of the ink on the quality of the product In general, the thicker the ink, the greater the viscosity, and the lower the fluidity of the ink. If the ink is too thick, the ink in the ink fountain is not easy to drop ink, and the ink on the ink roller is not easy to hit evenly, so that the ink on the printing plate cannot be kept uniform, and it is easy to accumulate on the printing plate, and it may cause paper shaving and other phenomena. If the ink is too thin, the viscosity is too small, and the fluidity is too large, it will make the printed product dull and dull, distorted, the dot deformation is enlarged, slurred, and it is also easy to cause smudging and other phenomena.
Judging from the nature of the ink, magenta ink and black ink should be thickened, followed by cyan ink, yellow ink, light red, light blue and so on.
Judging from the distribution of graphic images on the layout, when printing a large-area field version, the ink must be thinned, and the field version can be printed on a plain clothing, which is not easy to brush; but when printing a screen version, the ink is required to be thicker to prevent the deformation and expansion of the dot. Confused.
From the climatic situation, when the temperature is high, the fluidity of the ink increases, so in order to properly control the fluidity of the ink, it should be adjusted thicker; when the temperature is low, the fluidity of the ink shrinks, so it should be thinned ; When the climate is dry, the ink should also be thinned appropriately.
From the machine speed, the machine speed is fast, the ink roller will generate heat when it is running fast, and the fluidity of the ink will increase, so the ink should be thickened; otherwise, the machine speed is slow, the heat generated when the ink roller is running Relatively lower, so the ink should be thinned appropriately.
Judging from the smoothness of the paper, when the surface of the paper is rough, the texture is soft, and the absorption is large, the ink should be thinned; on the contrary, the ink should be thickened, because the ink is too thin and it is easy to cause rubbing.
If you have never had a Fireplace Blower installed in your fireplace insert before or you need to replace some of the accessories for your old fireplace blower, then you are going to need to get a Fireplace Blower Kit.
A Fireplace Blower Kit is also referred to as (Forced Air Kit, Forced Air System, Fan Kit, Fireplace Kit, and Blower Kits), we also manufacture various cross flow blower, mica heating elements, convection heating element, PTC heating element, AC shaded pole motor, DC brushless motor, metal wind wheel etc, which are UL/CSA, CE, VDE approved. These products are mainly used in electrical fireplace, convector, warmer, heater, stoves, clothes dryer and more.
Fireplace Blower Kit
Fireplace Blower Kit,Fireplace Blower,Gas Fireplace Blower,Fireplace Blower Fan
Dongguan Jiangxin Metal Products Co., Ltd , https://www.jiangxinbbq.com