All products of EPSON printers adopt the design method of the separation of the nozzle and the ink cartridge. The piezoelectric nozzle is used, and there is no heating process during inkjet, which is "cold spray". The design of this equipment is very precise, especially the nozzle part. And EPSON's ink is "quick-drying", so it is easy to cause the nozzle of the print head to be blocked for a long time.
The conventional solution is to use the "clean" function in the driver, but this function is achieved by flushing the nozzle with ink, and the cost of ink is high, so the waste is very serious. So the editor here introduces you to a little trick.
The idea is this: There are two main reasons why the nozzle is blocked. One is that the printer is not used for a long time. The ink evaporates in the nozzle and becomes dry toner, which is plugged in the nozzle. The other is that the mixed ink and the original ink are mixed and neutralized due to the different charging of the colloid, forming a sediment to plug the nozzle. This situation is most likely to occur for black ink. If we leave the nozzles free of ink when not in use for a long time, and before filling the new inks with the original inks in the printer, the problem is solved.
The implementation method is very simple: first make a cleaning ink cartridge: find several ink cartridges that have run out of ink (see your printer use several ink cartridges at the same time), pry it open, take out the foam inside, find a piece of foam of similar size (find It ’s not enough to use the original one, but it needs to be cleaned), put it in clean water together with the empty ink cartridge (if you are not worried, you can use pure water to do it, it is best to soak it for a while). After cleaning, allow the foam to absorb enough purified water to replace the empty ink cartridge. One cleaning cartridge is ready.
It is very simple to use: remove the existing ink cartridge on the printer, install the cleaning ink cartridge, use the printer's cleaning nozzle function, and clean the print head multiple times. You can also print a picture in all colors. When you can't see any color, the nozzle will be cleaned.
With the method, we should apply the above method in a timely manner. One is before you plan to use it for a long time (or simply before work every day), and the other is before you plan to replace the ink cartridge or refill the ink.
Now Canon's latest S-series printers also use this technology to separate the print head from the ink cartridge. We can make it according to law to prevent the nozzle from being blocked. In addition, it is best not to use the method of refilling ink to save costs, and poor quality ink can easily cause nozzle clogging.
Non-woven fabric, is a new generation of environmental protection materials, with water repellent, breathable, flexible, non-combustion, non-toxic and non-irritating, rich color characteristics. If the non-woven cloth is placed outside and decomposed naturally, its maximum life is only 90 days. If placed indoors, it will decompose within 5 years. When burning, it is non-toxic, odorless and free of any residual substances, so as not to pollute the environment and is suitable for washing. It has the environmental protection performance which the plastic product does not have, its by the natural degradation time is far lower than the plastic bag, therefore, USES the non-woven fabric to make the non-woven fabric bag also to be recognized as the most economical environmental protection shopping bag.
Recycle Non Woven Bag,Non Woven Reusable Shopping Bags,No Side And Bottoms Bags,No Side And Bottoms Bags
Wenzhou Shandao Electronic Commerce Co., Ltd. , https://www.reusablebaglife.com