Centrifuge rules
1. When the centrifuge is in the pre-cooling state, the centrifuge cover must be closed. After the centrifuge is completed, the rotor should be taken out and placed upside down on the laboratory table.
2. When the rotor is pre-cooled, the rotor cover can be placed on the platform of the centrifuge, or placed on the experimental table, and it must not be tightened and floated on the rotor, because the rotor cover will be Will fly out and cause an accident!
3. After tightening the rotor cover, be sure to touch the seamless gap between the rotor and the rotor cover with your fingers. If there is any gap, unscrew and re-tighten the centrifuge until the seamless gap is confirmed.
4. During the centrifugation process, the operator must not leave the centrifuge room. Once an abnormal situation occurs, the operator cannot turn off the power (POWER) and must press STOP. Fill in the centrifuge use record before pre-cooling.
5. Do not use fake and inferior domestic centrifuge tubes, or use aging, deformed or cracked centrifuge tubes.
6. The last security check using a centrifuge on holidays and nights before leaving.
7. Machine failures occur during the use of the instrument, and please contact us in time when the components are damaged
Toilet Paper,Jumbo Toilet Rolls Wholesale,Four Ply Toilet Paper,Compact Toilet Paper
DONGGUAN YEE HUP TRADING CO,.LTD , https://www.yeehupack.com