First, the maintenance and maintenance of plastic floor cleaning Clean the surface of the floating dust, clean the floor with a neutral detergent or a weak alkaline cleaner.
Specially dirty areas and corners can be cleaned with a nylon brush and detergent.
Large areas require a cleaning machine and the floor is cleaned with a low speed washer (150-200 rpm) with a red pad.
After cleaning, mop the floor with a mop and clean water to ensure that all residual detergent is cleaned from the floor.
Waxing The uniform application of wax water on the surface of the floor helps to extend the life of the floor and reduce maintenance costs.
Decontamination It is recommended to use chemical agents to treat stubborn stains. Mechanical scrubbing is not recommended.
Do not burn when handling the floor.
Decontamination powder will make the floor discoloration should be used with caution.
Maintenance If the surface is particularly dirty after using for a period of time, remove the surface wax layer with wax water, clean it with water, reproduce waxing, and the surface will be bright as new.
Second, stain removal method Blood-urine-feces: Remove with diluted bleach, then wash thoroughly with water to remove all residue.
Vinegar - Tomato - Mustard: Add a few drops of ammonia to the water to remove dirt.
Rust: Use the patented product for anti-rust treatment or oxalic acid (cleanly).
Heavy grease - paint - rubber scratches - hair dyes - food oil - ballpoint pens or label pens: with gasoline, petroleum spirits. Brush with an undiluted detergent and thoroughly clean to remove any residue.
Cigarette burn marks: For wax products, use a very fine sandpaper to gently grind. A layer of self-luminous emulsion is then applied over the entire surface.
Third, the precautions Rubber flooring materials and all heavy-duty flooring materials require correct, regular maintenance. Regardless of the materials used in the manufacturing process, satisfactory results can only be obtained by following the basic maintenance rules below.
1. Do not use a seat cushion with a rubber backing. Black rubber will leave a stain on the floor material that is difficult to wipe off.
2. Prevent sharp objects from scratching or scratching the floor surface.
3. Lay a layer of insulation mats (without rubber backing) at the entrance and entrance to prevent the sediment from entering the damaged floor.
4, no smoking, to prevent cigarettes, electric heaters and other high temperature objects from contacting the rubber floor.
5, ink stains, iodine and other traces should be wiped immediately and cleaned with neutral cleaning to prevent it from drying out difficult to remove.
6, be careful not to use super multi-purpose detergent to avoid discoloration of the floor.
7. Replace the tubular furniture support feet with support feet made of PVC or polyurethane (do not use rubber support feet and wheels).
8. Do not use solvent-based waxes, sealants, polishes or varnishes. Especially those that contain acetone and other PVC solvents.
9. Do not use corrosive solvents such as strong acid, strong alkali or Tianna water to avoid damage to the floor.
10. After the ground is laid for 72 hours, maintenance can be carried out. Do not flood or flush the floor with water.
Granule Semi-automatic Packing Machine
Granule Doypack Packaging Machine,Custom Automatic Packing Machine,Pet Granule Food Packing Machine,Semi-Automatic Granule Packing Machine
Jinan Guoqiang Machinery CO,.ltd , https://www.jinanpackaging.com